Upcycled T-Shirt Yarn Rugs for Entryways

Upcycled T-Shirt Yarn Rugs for Entryways

Posted on

5 min read

Upcycled t-shirt yarn rugs turn worn shirts into durable, colorful floor coverings. T-shirt yarn is made by cutting old shirts into continuous strips, which crochet or braid into thick rugs. The project costs almost nothing and keeps textiles out of the landfill. A finished rug is soft underfoot, machine washable, and full of character.

Manufactured rag rugs

Start by gathering old t-shirts in colors you enjoy. Cotton shirts work best because the fabric stretches slightly and lies flat. Avoid shirts with heavy prints or thick seams, since they make the yarn uneven. Wash and dry the shirts before cutting so the yarn is clean and preshrunk. A dozen shirts yields enough yarn for a small rug.

Cut each shirt into a continuous strip about one inch wide. Start at the bottom hem and cut in a spiral, leaving a small uncut section at each turn so the strip stays connected. Stretch the strip gently to curl the edges inward, which gives the yarn a smooth, rounded look. Wind the finished yarn into a ball as you go.

Making T-Shirt Yarn

Lay the shirt flat and cut off the sleeves and the top above the armpits, since these parts have seams that interrupt the strip. Cut the remaining tube into a spiral strip, keeping the width even. An uneven strip makes lumpy yarn, so take your time and measure as you cut. A rotary cutter and a clear ruler speed up the work considerably.

Join strips from different shirts by overlapping the ends and stitching them together, or by cutting a small slit in each end and looping them through. A stitched join is smoother and less likely to catch during crocheting. Wind the joined yarn into one large ball, sorting by color if you plan a striped pattern.

Crocheting the Rug

Use a large crochet hook, size N or larger, to work with the thick yarn. Chain a foundation row to the desired rug width, then work in single crochet back and forth. Keep the tension loose so the rug lies flat rather than cupping. A rug that cups can be blocked flat with steam after it is finished.

Change colors every few rows for a striped rug, or work in one color for a calm, solid look. Carry the unused yarn along the edge when changing colors so there are fewer ends to weave in. Check the rug width regularly, since t-shirt yarn stretches and it is easy to add stitches accidentally.

Shaping and Sizing

For a rectangular rug, work straight rows until the rug reaches the desired length. For a round rug, work in rounds and increase evenly to keep the circle flat. A round rug needs about six increases per round for a flat shape. If the edges ruffle, you are increasing too fast; if the rug cups, you need more increases.

Measure the rug against the space where it will live. An entryway rug should be long enough for two steps, while a bedside rug needs to fit beside the bed. A rug that is slightly larger than the space looks generous, while a rug that is too small looks lost. Aim for a size that anchors the area.

Finishing the Edges

Finish the rug with a round of single crochet around the entire edge to give a clean border. This final round evens out any uneven stitches and frames the rug nicely. Weave in all yarn ends securely so they do not work loose during washing. A neatly finished edge makes the rug look intentional rather than improvised.

Block the finished rug by laying it flat, steaming it lightly, and letting it dry completely. Blocking evens out the stitches and helps the rug lie flat on the floor. If the rug still curls at the corners, place heavy books on the corners overnight. A flat rug is safer and looks better.

Washing and Everyday Use

T-shirt yarn rugs wash well in a machine on a gentle cycle with cool water. Wash them alone or with similar colors, since the yarn can shed lint in the first few washes. Lay the rug flat to dry, reshaping it while damp. A freshly washed rug feels soft and looks bright again.

Place a non-slip rug pad under the rug to keep it from sliding on hard floors. Rotate the rug occasionally so wear evens out. With regular washing and a rug pad, a t-shirt yarn rug lasts for years and keeps a dozen shirts out of the trash.

Mix yarn from patterned shirts with solid shirts for a speckled effect. The printed sections create small flecks of color across the rug. This works especially well with striped or graphic shirts, since the print fragments become abstract spots.

Make a matching small mat for a pet bed or a chair seat from leftover yarn. Small mats use up the last balls of yarn and keep the color scheme consistent across the room. A coordinated set looks intentional and tidy.

If the rug slides on a smooth floor, sew a few strips of non-slip shelf liner to the underside. The liner grips the floor and keeps the rug safely in place. Every rug tells the story of the shirts it came from. A rug made from old shirts is soft, sturdy, and full of memories.

Before you go, take a look below: more Upcycling guides, hand-picked to follow this one.

Reference: Rugs — Wikipedia

Related Articles:

Tried this project?

Show us how yours turned out in the comments — your version might be exactly the inspiration another maker needs.

If this tutorial helped, share it with a fellow crafter.