6 min read
Fabric-covered buttons give homemade clothing a polished, professional finish that store-bought buttons rarely match. When the buttons match the garment fabric exactly, a blouse, jacket, or dress looks like it came from a high-end boutique. The technique is simple, inexpensive, and easy to learn in a single afternoon. All you need is a button-covering kit, some fabric scraps, and a little patience. This guide walks you through the whole process, from choosing materials to attaching the finished buttons to your favorite garments.

What You Need
Start with a button-covering kit, which you can buy at any fabric store or online. Each kit contains metal button blanks in two parts, a small assembly tool, and instructions. Kits come in many sizes, from tiny shirt buttons to large coat buttons, so pick the size that suits your project. You will also need fabric scraps that are slightly larger than the button, a pair of sharp scissors, and a marker for tracing. Lightweight and medium-weight fabrics work best, because thick fabrics bunch up and make assembly difficult.
Choose fabric with a small, tight pattern if you want a neat look, since large prints get cut off and can look random on a small button. Solid colors, tiny florals, gingham checks, and fine stripes all work beautifully. If your garment fabric is very thin, back it with a layer of lightweight fusible interfacing before cutting. This keeps the fabric from stretching or showing the metal underneath. Test one button first with your chosen fabric to make sure the result looks clean before you commit to a full set.
Preparing the Fabric
Cut fabric circles that are about twice the diameter of the finished button. Most kits include a plastic template for this step, but you can also trace around a coin or a small glass that is roughly the right size. Accuracy matters less than you might think, because extra fabric tucks underneath and gets hidden inside the button. Still, circles that are too large create bulky folds, while circles that are too small leave gaps where the metal shows through. Aim for a circle that covers the button with about one centimeter of excess all the way around.
If your fabric frays easily, seal the cut edges with a thin line of clear fabric glue and let it dry before assembly. This step prevents loose threads from poking out around the button edge. For slippery fabrics like satin or silk, a light spray of starch makes the material easier to handle and keeps it from sliding during assembly. Press each circle flat with a warm iron so the fabric sits smoothly over the button form. A wrinkled circle will show every crease in the finished button, so take a moment to smooth each piece.
Assembling the Button
Place one fabric circle right-side down on the assembly tool, then set the button top, dome side down, in the center of the fabric. Push the fabric edges down around the button shell so the material wraps evenly over the dome. Take care to keep the pattern centered if you are using a printed fabric. The back piece of the button then presses into the shell, trapping the fabric in place. Push firmly until you hear or feel a click, which tells you the two metal parts have locked together.
Remove the finished button from the tool and inspect it from every angle. The fabric should be smooth and taut across the dome, with no wrinkles, puckers, or bare metal showing. If the fabric bunched on one side, you can usually pop the button apart with a flat screwdriver and try again with a fresh circle. Do not reuse a circle that has already been pressed, because the creases will show. Work through your buttons one at a time, and set each finished button aside on a clean towel so the fabric stays neat while you finish the rest.
Attaching Buttons to Garments
Covered buttons attach to clothing just like ordinary sew-through buttons, but the metal shank on the back gives you a convenient anchor. Thread a needle with doubled thread that matches your garment, and sew through the shank several times, pulling the thread snug after each stitch. For heavy coats and jackets, add a small flat button on the inside of the garment behind each covered button. This reinforcement spreads the strain and keeps the button from tearing through the fabric over time. Knot the thread securely on the inside and trim the tail close.
Space the buttons evenly along the garment opening, and mark each position with chalk before you start sewing. A ruler or a strip of masking tape helps you keep the spacing consistent from top to bottom. Try the garment on after sewing the first two buttons to check that the opening hangs straight and the buttons line up with the buttonholes. If anything looks off, it is much easier to move a button now than after all of them are attached. Press the finished garment gently, keeping the iron away from the buttons so the fabric covering does not scorch.
Design Ideas and Finishing Touches
Once you know the basic technique, you can use covered buttons for all kinds of creative projects. Cover buttons with leftover fabric from a dress to make a matching belt, hair accessory, or bag clasp. Mix two or three coordinating prints on a single garment for a playful patchwork effect. For a more refined look, cover buttons with velvet, linen, or fine wool to match the texture of the garment itself. Covered buttons also make charming magnets, drawer pulls, and gift packaging decorations when glued to flat surfaces.
Store spare buttons in a small labeled box so you can find them when a garment needs repair. If you ever need to replace a lost button, having the same fabric on hand means the replacement will match perfectly. With a little practice, you can cover a full set of buttons in under an hour, and the results look far more expensive than the materials cost. Try the technique on your next sewing project and enjoy the polished, custom-made finish that only matching covered buttons can give.
Like this one? The short list below is built from the same shelf, and Embroidered Denim Jacket Patches with Floral Motifs is a strong next pick.
Reference: Buttons — Wikipedia
Related Articles:
- Embroidered Denim Jacket Patches with Floral Motifs
- Sewn Aprons with Patch Pockets from Kitchen Towels
- Sewn Zipper Pouches with Lining for Everyday Carry
Tried this project?
Show us how yours turned out in the comments — your version might be exactly the inspiration another maker needs.
If this tutorial helped, share it with a fellow crafter.
